 - When a computer is booted (started), serial presence detect (SPD) is information stored in an
electrically erasable programmable read-only memory (EEPROM) chip on a synchronous dynamic random access memory (SDRAM) memory module that tells the
basic input/output system (BIOS) the module's size, data width, speed, and voltage. The BIOS uses this information to configure the
memory properly for maximum reliability and performance. If a memory module does
not have SPD, the BIOS assumes the memory module's information. With some
memory, this does not cause problems. But SDRAM memory has to have SPD or the
computer may not boot at all. If it does boot, the assumed information may cause
fatal exception errors
Before SPD, memory chips were identified with parallel
presence detect (PPD). PPD used a separate PIN for each bit of information,
which meant that only the speed and density of the memory module could be stored
because of the limited space for pins. The EEPROM chip on an SPD memory module
only requires two pins so more information can be stored.
| CONTRIBUTORS: |
Kris Faulkner |
| LAST UPDATED: |
31 Jul 2001
|
 |
Read more about serial presence detect:
|
|
Do you have something to add to this definition? Let us know.
Send your comments to techterms@whatis.com
|
|
